Motor
- Briggs & Stratton Series 8270 Commercial
- Elektro starter sa 12 V baterijom
- Zapremina 724 cc, 2 Cilindra
- Snaga 22 HP (16.2 kW)
- Vazdušni filter
- Papirni filter sa promenljivim ketridžima
Kapacitet rezervoara
- Rezervoar 13l
Prenos
- Hidrostatički prenos na 4 točka
Kvačilo
- Elektromagnetno kvačilo sa kočnicom noža
Kosište
- Zadnje/bočno izbacivanje
Širina otkosa
- 98 cm, nož sa plivajućim oštricama otpornim na udarce
Visina košenja
- Od 35 do 135 mm sa stalnim podešavanjem
Periferna brzina sečiva
- 87 m/s
Zaključavanje diferencijala
- Zadnje osovine pomoću pedale
Prednji točkovi
- 16×6.50-8 TRACTOR otporni na probijanje
Zadnji točkovi
- 20×10.00-8 TRACTOR
Brzina
- Kontinuirano promenljiva od 0 to 9 km/h, rikverc od 0 do 8 km/h
Radijus okretanja
- 70 cm
Sedište
- Nisko i podesivo sedište, sa rol barom
Servisna kočnica
- Na prednjim točkovima kočnicama se upravlja pedalom
Parking kočnica
- Na zadnjim točkovima kočnicama se upravlja polugom
Kapacitet košenja po satu (indikativno)
- 7500 m^2/h
Dodatna oprema
- Kuka za vuču i LED far
Dužina
- 2060 mm
Širina
- 1080 mm
Visina
- 1185 mm
Težina
- 385 kg
The whole cutting system is always kept parallel to the ground, this ensures top cutting quality even after years of service.
The blade is made of special steel and has a low-noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out.
The whole structure of the cutting deck is very robust and remarkably resistant to impacts with stones. The large diametre blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety.
The cutting deck has two side protection baffles that can be raised to make maintenance and cleaning easier. The twin-cylinder, four stroke petrol engine has a 22 HP net power. It is fitted with a cyclonic professional air filter especially suitable for dusty environments and very easy to access for routine cleaning. The low-emission silencer is made of stainless steel. The fuel tank has a capacity of 13 litres and is equipped with a large filler for easier refuelling and a built-in fuel indicator on the cap.
The permanent four-wheel drive transmission is composed of two hydrostatic axles. The rear hydrostatic axle is equipped with differential lock via pedal, which proves to be exceptionally useful on severe slopes and low-adherence grounds. Larger TRACTOR wheels are fitted to achieve more adherence and greater comfort on irregular ground. The front wheel axle steers and tilts and it is equipped with a hydraulic system that combined with the differential on the rear axle ensures permanent drive on all four wheels to prevent the wheels from skidding even in the tightest turns.
Thanks to the four-wheel drive the operator can stop on slopes just by using the forward lever and can engage reverse in total safety with no wheel skidding. The hydrostatic motors on the front axle are protected by an anti-shock steel plate.
The Climber 10 is equipped with major stainless steel hydraulic pipes connecting the two hydraulic axles. Together with a cooling fan placed on the rear axle, they keep the hydraulic oil working pressure low to guarantee high performances even under the most demanding working conditions.
TRACTOR wheels ensure adherence on irrgular grounds. In addition front wheels are puncture-proof.
Transfers with Climber 10 are faster thanks to its speed of 9 km/h. In the case of very irregular conditions, the cutting deck can be raised up to 13,5 cm from the ground.
The roll-bar can be tilted in a couple of seconds to allow working underneath foliage. The roll-bar can be either raised or lowered via two levers, no other tools are required.
Climber 10 is equipped with a seat whose suspension can be adjusted according to the operator’s weight. In addition the whole seat support is fitted with twin shock-absorbers to ensure greater comfort even after a long working day. Controls are comfortable, the forward control lever enables the operator to choose the exact ground speed. When operating the brake pedal, the rear axle is braked and the forward lever comes back automatically to its stop position.
On the upper par of the cutting deck there is a baffle, that if positioned, inside the cutting deck, evenly distributes the grass onto the lawn. The rotating beacon can be mounted on the roll-bar and is then connected to the 12V plug. Each single component, from the simplest to the most complex, is of high quality. Frame, handlebar, cutting deck, are all designed and built by Grillo using exclusively premium materials and modern technology to ensure 100% controlled, high quality.
Painting of Grillo machines incorporates a double electrostatic powder coating process. At the first stage are the washing baths and preparation, then a first protective coat is applied which is then baked in a special oven, this has proven to be the best base for the application of the finish. The second coat consists of powder coating and still further baking in an oven at 190°C, this then produces the characteristic hardness and shine.
Assembling operations of Climber 10 AWD 27 are carried out meticulously by specialist staff. It then undergoes a rigorous final test with its engine running to ensure that all of its functions work properly. More proof of the quality of Grillo products.
Like all Grillo products, Climber 10 AWD 27 has been designed and built to last and retain its value over many years. All Grillo machines are distributed and serviced by a widespread dealer network. Spare parts are quickly available even for 30-year-old machines.