logo
Climber 7.13
Grillo hidrostatski traktor sa blokadom diferencijala

Climber 7.13

 

Climber 7.13 - 644.280,00

 

Climber 7.13
Climber 7.13

Climber 7.13

Climber 7.13
Climber 7.13
Climber 7.13
Climber 7.13
Climber 7.13


 

Podesivi prednji raonik 125 cm

9G2611

Za upotrebu na Climber 10 AWD 22 - Climber 10 AWD 27 - Climber 7.13 - Climber 7.15 - Climber 7.16 - Climber 7.18 - Climber 8.22 - Climber 9.18 - Climber 9.22 - MD 13 - MD 18 - MD 22 - MD 22N

item no.: 9G2611

Težina: 54 kg

Item no. 949411 for Climber 9 Series needed

Item no. 949311 for Climber 7 Series needed

67.496,00

 

Gumena lajsna za raonik 125 cm

Rubber end for blade 125 cm - COD. 9E5911C

Za upotrebu na Climber 10 AWD 22 - Climber 10 AWD 27 - Climber 7.13 - Climber 7.15 - Climber 7.16 - Climber 7.18 - Climber 8.22 - Climber 9.18 - Climber 9.22 - Dumper 507 - G 107d - G 108 - G 110 - G 131 - G 85d - GF 3 - GF 3DF - MD 13 - MD 18 - MD 22 - MD 22N

item no.: 9E5911C

Težina: 1 kg

 

7.670,00

Nosač za raonik 125 cm za Climber seriju 7, MD

949311

Za upotrebu na Climber 7.13 - Climber 7.15 - Climber 7.16 - Climber 7.18 - MD 13 - MD 18

item no.: 949311

Težina: 5 kg

 

11.210,00

Lanci za sneg 16x6.50-8 Climber 7 serija (par)

9M3722

Za upotrebu na Climber 7.13 - Climber 7.15 - Climber 7.16 - Climber 7.18 - GH 7 - GH 9

item no.: 9M3722

Težina: 2 kg

 

16.284,00

Komplet za vešanje sedišta

9A4511

Za upotrebu na Climber 10 AWD 22 - Climber 7.13 - Climber 7.15 - Climber 7.16 - Climber 7.18 - Climber 8.22 - Climber 9.27 - MD 13

item no.: 9A4511

Težina: 9 kg

 

31.152,00

 

 


 

 
xxx Motor
Briggs & Stratton Intek 3.130 AVS
Elektro starter sa 12 V baterijom
Zapremina 344 cc, 1 Cilindar
Snaga 10 HP (7.2 kW)
Vazdušni filter
Papirni filter sa promenljivim ketridžima
Kapacitet rezervoara Rezervoar 7l (rezerva 1l)
Prenos Hidrostatik
Kvačilo Elektromagnetno kvačilo sa kočnicom noža
aa Kosište Bočno/zadnje izbacivanje
Širina otkosa 85 cm, nož sa plivajućim oštricama otpornim na udarce
Visina košenja Od 35 do 85 mm 6 podeoka za košenje + 1 za transport
Periferna brzina sečiva 76 m/s
aa Zaključavanje diferencijala Zaključavanje diferencijala pomoću pedale
aa Prednji točkovi 3,50-6 TRACTOR otporni na probijanje
  Zadnji točkovi 16x6.50-8 Tractor
Brzina Kontinuirano promenljiva od 0 to 9 km/h, rikverc od 0 do 6 km/h
Radijus okretanja 45 cm
Sedište Nisko i podesivo sedište, sa rol barom
  Servisna kočnica Na prednjim točkovima kočnicama se upravlja pedalom
  Parking kočnica Na zadnjim točkovima kočnicama se upravlja polugom
aa Kapacitet košenja po satu (indikativno) 4800 m^2/h
  Standardne karakteristike Priključak za prikolicu i prednji far
aa Dužina 1895 mm

Širina
950 mm
  Visina 985 mm
aa
Težina 225 kg
The Climber 713 is a hydrostatic grass/rough cutting machine with a single blade, diff-lock, front safety brakes and electro-magnetic clutch. It is ideal when cutting long grass, small saplings, bracken etc on slopes or undulating ground. Thanks to its powerful 10HP engine, the Grillo Climber 7.13 is able to work safely and efficiently in maintaining overgrown neglected areas,woodland rides,paddocks etc. The extreme manoeuvrability, smooth steering and its speed allows the machine to work quickly and efficiently but at the same time it is simple and easy to operate. A machine which can be operated by most people!
The single blade cutter deck has an 85 cm working width. The robust structure of the deck is able to handle stones and other type of debris with no problem. The large diameter blade and the cutter deck’s drive system ensure reliability under heavy working conditions over long periods and also in safety. The cutter deck’s blade is produced from a special type of steel and has a specially designed profile to reduce noise, the blade tips are sharpened on both sides, (once they are worn they can be reversed for extended life) and are also of the swing back type configuration, this helps to protect the blade shaft, should an unseen object be struck. The cutter deck has side protections that can be raised, making cleaning and maintenance work much more easier.

The Climber 7.13 is compact with a low centre of gravity and optimal weight distribution and has been designed to obtain maximum stability and maximum safety for its operator. The reduced ground clearance makes the 7.13 ideal for work under low positioned branches etc. The seat which is located low down in the machine (the lowest in this kind of category), the engine, again positioned low in the chassis, the cutter deck placed exactly between the 4 wheels and the battery housed over the front axle, contributes to the machine’s extraordinarily stable and safe behaviour when working on slopes.

The extremely small turning radius of just 45 cm ensures tight areas are no problem. The pivoting front axle and the “Tractor” profile tyres ensure grip and drive on uneven or slippery ground. The Grillo Climber 7.13 will climb slopes in safely. With the aim to further increase the operator’s safety, the machine is fitted with drum brakes on each front wheel and are activated via a foot pedal. The front wheels are anti-puncture treated to help with working in the most hostile areas possible!

Transmission consists of a hydrostatic axle equipped with an oil cooling fan, which is absolutely necessary to increase the transmission’s performance by reducing its temperature. The mechanical diff-lock is standard, and is operated via a pedal. This device is indispensable for working on slopes with little grip or in the case of extremely uneven ground, where the machine would perhaps be working on only 3 wheels.

Engagement of the blade is operated via an electric push-button positioned close to the steering wheel. The cutting height from 35 to 85 mm is regulated from the driver’s seat by a lever having 6 cutting positions, this same lever has a further position for transfer, it raises the cutter deck from the ground. This procedure interrupts the blades’ rotation in order to negotiate over kerbs and other obstacles. The deck’s belt tension is self-adjusting. The whole deck is constantly kept parallel to the ground improving the cutting quality even after years of use.

The Grillo Climber 7.13 is an extremely comfortable machine to use! The extraordinary leg room is obtained via a low two position adjustable footrest. The operator’s feet are at the optimum angle to achieve maximum safety. The drive lever and the steering wheel are smooth in operation. The comfortable, adjustable & dampened seat is fitted with armrests that retain the operator while working slopes.
Driving the Climber 7.13 will not cause fatigue during extended working periods!

The Climber 7.13 is powered by a Briggs & Stratton petrol engine with electric start and has a 7 ltr fuel tank. The single cylinder overhead valve engine and cast iron liner has a 344 cc displacement with all the latest innovations to offer reliability, low emissions, reduced consumption, high performance and vibrations reduced to the minimum. The air filter is easily accessible for quick cleaning operations. The Climber 7.13’ s exhaust “Grillo Super Silent” is designed by Grillo and was developed to obtain maximum noise reduction and minimum resistance at the exhaust.

The Climber’s 7.13 aggressive styling is up to the minute! The modern and clean lines of it bodywork line and chassis catches the eye! The 7.13 has passed very stringent tests to prove the reliability of its transmission, cutter deck, chassis and all its components. Engine protection bar, tow hitch, hour meter and front light are standard features.

All components, from the simplest to the most complex, are of a high standard. The chassis, cutting transmission, cutter deck, are all built by Grillo using premium materials and cutting edge technology. All this in order to achieve a constant 100% quality control level. Painting of Grillo machines incorporates a double electrostatic powder coating process. At the first stage are the washing baths and preparation, then a first protective coat is applied which is then baked in a special oven, this has proven to be the best base for the application of the finish. The second coat consists of powder coating and still further baking in an oven at 190°C, this then produces the characteristic hardness and shine. All Climbers 7.13 are assembled with care in every detail and tested scrupulously by specialized personnel. Final inspection includes running the engine in order to check all its functions to ensure a further and final guarantee of a first class product. 

The Climber 7.13, as with all Grillo products, was designed and built to last plus retain its value over many years. All Grillo machines are distributed and serviced by a widespread dealer network. Spare parts remain available for many years after production has stopped giving you extra confidence in Grillo.